Featured Streetlight/ Photocell Power Taps
Street light power taps are miniature and compact devices that allow for the use of electricity from street light poles in powering different ancillary equipment. They are installed between the photocontrol (photocell) device and the luminaire, allowing for normal ON/OFF and dimming control to happen uninterrupted.
Some key aspects to look at when selecting a suitable unit are:
- number of pins (either 3 or 7 pin)
- power output cable length and size
- operational voltages (both input and output)
- rated operating power
- nature of cable termination (bare wire/ pigtail, NEMA receptacles etc.)
Here is a list of some common variants:
| Product | Specifications |
|---|---|
| 5731-20-1 120 V Photocell Power Tap Adapter with bare 20 ft cable pigtail |
|
| 5771-25-1 120V Photocell Power Tap, Retains Dimming Control, 25 ft pigtail end |
|
| FP283A-1-120-NNN Pass Through AC Streetlight Power Tap Adapter, Continuous On, 10ft Cable |
|
| PHTCELTAP Photocell Power Adapter Tap for Streetlight |
|
| 5731-10-2 120 V Photocell Power Tap Adapter with 10 ft 2 prong female cord |
|
| 5771-10-2 120V Photocell Power Tap, Retains Dimming Control, 10 ft 2 prong receptacle |
|
| 5731-10-3 120 V Photocell Power Tap Adapter with 10 ft Mini Link cord |
|
| 5730-10-2 120V AC Dusk to Dawn Photocell Power Tap Adapter with 10 ft 2 Prong Female Cord |
|
| FP287A-120-ACN-A 48VDC, 20W POE Streetlight Power Tap, 7 Pin Control Passthrough 105-130VAC Input |
|
| 5731-20-2 120 V Photocell Power Tap Adapter with 20 ft 2 prong female cord |
|
| FP283A 120V AC Streetlight Power Tap Adapter, Continuous On |
|
| FP283A-7-120-NNN 120V AC Streetlight Power Tap Adapter, Continuous On, 7-pin control Passthrough |
|
| FP283A-7-300-NNN Continuous On 120VAC Streetlight PowerTap Adapter with 7 Pin Control Passthrough |
|